Jeep Wrangler Jacks

Hi-Lift Jack HL484 48″ Hi-Lift Black Cast and Steel Jack

Hi-Lift Jack HL484 48

  • Top winch-connector clamp standard on all jacks
  • Powder coated finish with zinc-plated hardware
  • Safe use information including rated load details and operating instructions
  • Two piece handle and socket is durable and reliable

Hi-Lift Cast and Steel Jacks have four stamped high-strength steel parts in combination with the cast parts. The top winch connector clamp is supplied standard with all Hi Lift jacks and each jack is fitted with a safety shear bolt which prevents the jack from being used on loads greater than 7000 pounds.
More Info

$ 59.99

Smittybilt 2722 Universal Trail Jack – 54″

Smittybilt 2722 Universal Trail Jack - 54

  • Large base and adjustable connector clamp
  • Constructed of solid cast steel and finished in durable powder coat
  • All hardware is zinc plated
  • 54 inches in height
  • Color: Gray/Black

Smittybilt Universal Trail Jack is engineered to meet all the high standards set by the industry. It is highly durable and matches OE form, fit and function. This unit is put through a variety of tests under extreme and unusual conditions to ensure high quality and dependability.
More Info

$ 53.99

Jeep Wrangler Spare Tire JACK BASE BOOSTER, OE Mopar

Jeep Wrangler Spare Tire JACK BASE BOOSTER, OE Mopar

  • OEM!
  • Fits in Storage Compartment

JEEP WRANGLER SPARE TIRE JACK BASE

Here is a great little item that all Jeep Wrangler owners should have. This rugged hard molded plastic provides a firm foundation for changing a flat tire should the occasion arise. This jack base has a molded indentation for your factory scissor jack to keep it planted firmly in place. If your Jeep is lifted it will also give you the extra boost needed, so that you can change your flat. Jeep Wrangler JK owners will also love how it fits neatly into your rear cargo compartment area.
More Info

$ 51.50

Rugged Ridge 11586.02 Hi-Lift Style Off-Road Jack Roll Bar Mounting Bracket

Rugged Ridge 11586.02 Hi-Lift Style Off-Road Jack Roll Bar Mounting Bracket

  • Saves cargo space
  • Mounts off-road jack to Roll Bars
  • No drilling
  • Easy to install
  • Limited 5 year warranty

JK Off-Road Jack Mount allows you to carry your Off-Road jack on the outside of your vehicle saving precious cargo space. Fast and easy bolt on installation. Compatible with stock and most aftermarket rear bumpers (without tire carriers) as well as Rugged Ridge XHD rear bumper with or without tire carrier. Bracket is sturdy and secures the jack in two locations to eliminate any vibration noise during vehicle operation. Durable textured finish looks great. Fits most off-road style jacks including Hi-Lift.
More Info

$ 82.70

jeep wrangler jack

Warn 90030 Hi-Lift Jack Mount for Elite Rear Bumper

Warn 90030 Hi-Lift Jack Mount for Elite Rear Bumper

  • Easily attach Hi-Lift Jack Mount to Warn Elite Series Rear Bumper
  • Includes mount, foot clamp, clamp tab, threaded knobs, button head cap screws, and lock nuts
  • Works with Warn 89525 Elite Series Rear Bumper plus the Warn 89800 Tire Carrier for the ’07-13 Jeep Wrangler JK

The Warn Hi-Lift Jack Mount Kit allows you to easily mount a Hi-Lift Jack to your Warn Elite Series Rear Bumper for the Jeep Wrangler JK. Mount kit comes with mount, foot clamp, clamp tab, threaded knobs, button head cap screws, and lock nuts.
More Info

$ 90.37

jeep wrangler jack

Dominion OffRoad Jeep JK Wrangler Hi-Lift Jack Mount and Accessory Bars Combo Kit

Dominion OffRoad Jeep JK Wrangler Hi-Lift Jack Mount and Accessory Bars Combo Kit

  • Mount your Hi-Lift Jack, Axe and Shovel out of the way

The Dominion OffRoad Jeep JK Wrangler Stealth Jack Mount. A Hi-Lift Jack servers a very specific purpose. Honestly, we don’t need them often, but when we do no other tool will perform the same job. The Stealth Jack Mount kit stores your jack in an easily accessible location, while not taking up valuable storage space. The Dominion OffRoad works with the factory Hard top, Soft Top and Bikini. When using the factory soft top, the jack must be removed, in order to put the top up or down.
Our Hi-Lift Accessory Bars will store your shovel and Jack in the same convenient spot. This is a great combo for the JK. Installation of this Jack Mount Kit, requires a 1/2″-20 Fine Thread Tap
More Info

jeep wrangler jack

 

Jeep Wrangler 07-13 Jk Hood Hinge Hi-lift Farm Jack Mount & Jack Handle Strap

Jeep Wrangler 07-13 Jk Hood Hinge Hi-lift Farm Jack Mount & Jack Handle Strap

  • Qty.2 – TEXTURED BLACK JACK MOUNTING BRACKETS
  • STAINLESS STEEL MOUNTING HARDWARE
  • VELCRO JACK HANDLE STRAP INCLUDED
  • JACK MOUNTING HARDWARE (Jack sold separately)
  • MOUNTS IN APPROX 15 MINUTES

The Spyder Farm Jack/Hi Lift jack mount for the hood hinges of an 07-2013 Jeep Wrangler JK are the perfect addition to your off-road or custom Jeep Wrangler. Whether you’re out on the trail, or climbing the rocks, Spyder has your Hi Lift off road jack mounted safely and securely, up and out of harms way. Using tempered steel plate, Spyder’s hood hinge jack mounts are sure to hold up to the rigors of off-roading and/or daily use. Spyders jack mount has been designed with special bracketing system
More Info

jeep wrangler jack

 

 

 

Dominion OffRoad Jeep JK Wrangler Hi-Lift Jack Mount kit

Dominion OffRoad Jeep JK Wrangler Hi-Lift Jack Mount kit

  • Mount your Hi-Lift Jack out of the way

The Dominion OffRoad Jeep JK Wrangler Stealth Jack Mount. A Hi-Lift Jack servers a very specific purpose. Honestly, we don’t need them often, but when we do no other tool will perform the same job. The Stealth Jack Mount kit stores your jack in an easily accessible location, while not taking up valuable storage space. The Dominion OffRoad works with the factory Hard top, Soft Top and Bikini. When using the factory soft top, the jack must be removed, in order to put the top up or down.
Be su
More Info

jeep wrangler jack

Jeep Wrangler 87-06 Yj & Tj Locking Hood Hinge Hi-lift Farm Jack Mount

Jeep Wrangler 87-06 Yj & Tj Locking Hood Hinge Hi-lift Farm Jack Mount

  • Qty.2 – 3/16″ TEMPERED STEEL JACK MOUNTING BRACKETS WITH PADLOCK MOUNT (Lock sold separately)
  • STAINLESS STEEL MOUNTING HARDWARE
  • HARDWARE INCLUDED FOR- 87-95 YJ & 97-06 TJ
  • JACK MOUNTING HARDWARE (Jack sold separately)
  • MOUNTS IN 15 MINUTES

The Spyder Farm Jack/Hi Lift jack mount for the hood hinges of a CJ, YJ & TJ are the perfect addition to your off-road or custom Jeep CJ & Wrangler. Whether you’re out on the trail, or climbing the rocks, Spyder has your Hi Lift off road jack mounted safely and securely, up and out of harms way. Using 3/16″ tempered steel plate, Spyder’s hood hinge jack mounts are sure to hold up to the rigors of off-roading and/or daily use. Spyders jack mount has been designed with integrated security padlock mounting system to ensure nobody removes your jack from your vehicle while parked. The Spyder Hood Hinge Jack Mounts use a durable 2 stage crinkle black powder coating process to ensure years of use without signs of wear and a slick look that will set the Jeep apart from others! All necessary hardware is INCLUDED, so no need to include a note identifying the year of your vehicle like other sellers. We also back our products with a full 3 year warranty against manufactures defects (with a 1 year warranty on the finish)
More Info

$ 35.97

jeep wrangler jack

Dominion OffRoad Jeep JK Wrangler Hi-Lift Accessory Bars

Dominion OffRoad Jeep JK Wrangler Hi-Lift Accessory Bars

  • Attach a shovel and axe to you Hi-Lift Jack

The Dominion OffRoad Hi-Lift Accessory Bars allow you to mount tow long handle tools to your Hi-Lift Jack. You can now store an Axe and a Shove along with your Hi-Lift Jack. These Accessory Bars to not work with every Hi-Lift Jack Mount, but are a perfect addition to the Dominion OffRoad Jack Mount Kit. Includes four Quick Fists, Wing Nuts with integrated Washers and the Accessory bars themselves. (JK Jack Mount Kit NOT included)
More Info

$ 79.95

jeep wrangler jack